Elecraft KDSP2 Manual Manual de usuario descargar pdf (Pagina 3)

Assembly

Parts Inventory

Please check the enclosed parts with this list. Check off each item in the space provided. The number

following the check-off space is the quantity required. The part numbers referenced are not necessarily

marked on the parts. Rather, they are provided for reference when ordering replacement parts.

Parts Sorting

As you sort the parts, you may find it convenient to place them in a compartmented container for ready

access. Be careful of static electricity issues if you use an insulated container to hold the parts. Use of tape

to hold sorted parts is discouraged, as there is danger of static buildup as well as contamination of the leads

from adhesive residue.

NOTE: do not put ICs or any semiconductor component in a Styrofoam or other plastic container,

or damage from static may occur. Leave such parts in the envelope or foam provided until they

are called out in the assembly instructions.

Resistors

¼ watt, 5%, carbon film

OK Qty Reference Value Color Code Part Number

3 R6-8 120 ohm brown-red-brown-gold E500022

2 R11, R13 220 ohm red-red-brown-gold E500002

2 R17, R18 470 ohm yellow-violet-brown-gold E500003

2 R15, R16 2.2K red-red-red-gold E500107

7 R1-5, R10, R19 10K brown-black-orange-gold E500015

1 R9 47K yellow-violet -orange-gold E500067

1 R14 1M brown-black-green-gold E500024

2 watt, 5%, metal oxide

OK Qty Reference Value Marking Part Number

1 R12 43 ohm 430J or yellow-orange-black-gold E500108

1 2 3 4 5 6 7 8 ... 49 50

Sin comentarios

Elecraft KDSP2 Manual Manual de usuario Pagina 3