ELECRAFT K3-Remote El manual del propietario descargar pdf (Pagina 10)

Configuring Your Network Router

The network router used at the remote location must be configured for port forwarding as follows. No

configuration is required at the router used at the control location.

1. With a computer connected to the remote LAN router, open the browser and enter the router’s I.P.

address to open the router’s configuration page (Figure 7). Various makes of routers will show different

pages. The examples here show the Linksys router’s configuration pages. If you have a Linksys router,

the default URL is http://192.168.1.1

Figure 7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sin comentarios

ELECRAFT K3-Remote El manual del propietario Pagina 10