ELECRAFT K3-Remote El manual del propietario descargar pdf (Pagina 8)

7. Disconnect the USB cable between and connect both the RR-1256 Local (Control) unit with the CW

knob and the computer to your LAN (Figure 5). Note that the PWR light on the RR-1256 unit’s front

panel stops blinking and remains on, indicating communications with the router. If it continues to blink,

check to ensure the cable connectors are fully inserted and that you have a good cable. You must have a

steady green PWR light to proceed.

Figure 5

8. Open your computer browser and enter the I.P. address of the RR-1256 unit on the browser’s address

bar to open the Microbit program window shown in Figure 6. Unless you changed it in step five, the I.P.

address is 192.168.1.169. Click on Radio in the left menu to open the screen shown.

Figure 6

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Sin comentarios

ELECRAFT K3-Remote El manual del propietario Pagina 8